The Sky Q must be set into SCR mode - Home menu - 001 select - LNB setup -
Change to SCR mode
Will Require DC Term Blocks x 5 if used as end of line switch.
The TRIAX TMDS 5x Series provides:
4 x cascadeable LNB inputs from a universal Quattro LNB: VL HL VH HH
1 x terrestrial trunk.
4 x (TMDS 54 C) or 8 x (TMDS 58 C) - SCR/Legacy subscriber outputs for SkyQ
boxes, each providing access to 16 x SCR User Bands or a single Legacy.
1 x DC input.
2 x Toggle Switches for: DC sourcing (A) and TER AMP (active/passive) (D)
Voltage Input: 20V max
Current: 600mA max
LNB Current: 500mA max
LNB Inputs:* 950MHz - 2150MHz *LNB Trunk lines have DC Pass (20V)
Terrestrial Input:** 40MHz - 790MHz **Terrestrial Trunk lines do not have DC
Pass
All 4 LNB trunks are DC isolated from each other, so 13 and 18VDC can be
supplied separately from trunk-out to trunk-in. Also, the last 4 LNB trunks
should always be terminated with DC-blocked 75 Ohm terminators. Likewise, all
unused SCR/Legacy outputs should be terminated with 75 ohm terminator for
proper terrestrial signals.